Skip to content Skip to footer

Finlandia F-1T Sauna Control — 60-Minute Timer & Thermostat

$590

Financing from $11/mo*
Check Your Rate →
✓ No credit impact
LightStream SoFi Best Egg
Estimated. 5.99% APR over 60 mo on approved credit. Subject to credit approval. Eco Hearth is not a lender. From 5.99% APR via Acorn Finance.

Wall-mounted sauna control panel for Finlandia FIN-45 and FIN-60 heaters on 240V single-phase. Dial timer (1–60 minutes), thermostat, heater indicator light and a sauna-light switch in one flush-mounted plate. No contactor needed at this size.

SKU: 054-F-1T Category: Brand: Product ID: 51205

Description

The F-1T is the simplest sauna controller you can put on a FIN heater at home. It mounts flush on the wall outside the hot room and gives you the two dials that matter — how long and how hot — plus a light switch for the sauna and an indicator that tells you the elements are drawing power. Up to 6 kW on 240V single-phase it wires straight to the heater with no contactor in between, which is why it is the control we recommend with the FIN-45 and FIN-60.

For a FIN-80, for three-phase power, or for Wi-Fi preheat from your phone, see the combinations in the compatibility tab below.

Features

  • For FIN-30, FIN-45 and FIN-60 heaters on 240V single-phase
  • 60-minute dial timer
  • Thermostat
  • Heater indicator light
  • Sauna room light switch
  • Flush wall mount, outside the hot room
  • No contactor required at this size

What's in the Box

  • F-1T control

Which Finlandia Control Do I Need?

Finlandia’s analog controls are modular: the wall control does the thinking, and on anything
above 6 kW (or on three-phase power) a separate contactor does the switching. Here is every
combination that works.

FIN series heaters

  • FIN-45 or FIN-60, 240V single-phase — F-1T control on its own. Nothing else to buy.
  • FIN-80, 240V single-phase — F-2T control + FX402 contactor.
  • Any FIN at 208V three-phase — F-2T control + FX303 contactor.
  • Wi-Fi and remote preheatHarvia Xenio CX170, a single unit
    that covers every FIN model with no contactor.
  • Commercial, attendant on site — F-2 on/off control + a time clock (24HTC-T104
    mechanical 24-hour, or 24H7D-1725 digital 7-day) + the matching FX contactor.

Club and Virta series heaters

  • 240V single-phase — F-2T control + FX404 contactor.
  • Commercial — F-2 control + 24HTC-T101 (24-hour) or 24H7D-1705 (7-day) + FX404.

Not sure which you have? Email [email protected] with the
model number from the heater’s rating plate and the voltage at the panel, and we will confirm the parts
before you order.

Shipping

Controls, contactors and time clocks ship by parcel carrier, separately from a heater or together with it. Wiring must be done by a licensed electrician, following the heater’s installation manual and local code.

You may also like…

Got Questions?

We're happy to help! Leave your phone number and we'll call you back