Description
Most cold plunge chillers do one thing. The Pro does two — it cools water down to 3°C for an intense cold session, then heats it back up to 40°C for warm contrast therapy. One unit, one connection, one app on your phone. No switching equipment, no extra hardware.
The built-in circulation pump gets water moving the moment you turn it on. An ozone generator and three-stage micro-filtration run automatically in the background, so the water stays clean session after session without chemicals or extra gear. The whole thing runs at 53 dBA — quieter than a normal conversation — which makes it workable in a bedroom, garage, or shared studio.
The housing is corrosion-resistant and IPX4-rated, so it handles outdoor use year-round. Setup takes minutes: connect two hoses, prime the pump, and you’re ready to go.
What it does
- Cools water to 3°C for cold immersion — reaches target temp in around 8 hours from ambient (500 L, 18°C drop)
- Heats to 40°C for warm contrast therapy — no second unit needed
- Three-stage filtration: ozone generator + 20 μm micro-filter + 40 μm washable filter
- Built-in circulation pump — no external pump required
- Wi-Fi app control on iOS and Android — set temperature and timers remotely
- 53 dBA quiet operation — suitable for home, gym, and studio use
- IPX4-rated corrosion-resistant housing — works indoors and outdoors year-round
- Built-in RCD for electrical safety — no separate safety block needed
Works with your setup
- Compatible with most ice bath tubs, stock tanks, and plunge pools
- Connects via standard ½″ threaded fittings — two 1.5 m hoses included
- Position below the waterline so gravity feeds the pump — no self-priming required
- Suited for 400–500 L water volume
In the box
- Pro Water Chiller unit
- 2× water hoses (1.5 m each, ½″ threaded)
- 40 μm washable filter
- 2× water pipe adaptors, 4× camlock adaptors
- 1× ball valve, Teflon tape
